5 ft x 5 ft x 8 ft Triangle Exhibit Tower Display Includes SEG Custom Printed Graphics
This 8ft Tall Triangle Tower Display is a good standard height for exhibit halls everywhere. This tower is 5 feet wide and 3 sided so your branding and designs will be seen from all angles. Towers are a great choice for island exhibit booths, set them up right in the center and have lots of room all around the perimeter of your booth to meet with customers, show your products and display literature. Towers are also popular for retail POP displays.
SEG Tower Graphics: Each side of the tower holds 3 separate graphic panels. The graphics are custom printed on a stretch fabric material using dye sublimation for deep rich colors. The SEG fabric graphic has a stitched silicone edge beading around the perimeter that will push fit into the groove on the display frame. This creates a taut smooth edge to edge graphic surface with no creases or edge distortion.
How to setup your 8' tall tower display. Setting up your tower is fairly simple and more in depth instructions will come with the kit. First you will setup the tower frame, the only tool you will need is the torx key provided.Once the frame is assembled tilt the frame down on its side to install the graphics into the recessed grooves. Start midway in the groove by pressing the straight edges of the graphic into the groove, then press in the remaining graphic moving out towards the corners. Repeat for all sides. If setup is done correctly the graphic will fit snug and smooth.
Warranty: One year on frame, One year on graphics
Features and Benefits
8 feet tall to get you noticed from greater distances
3 sided so you are seen from all sides
SEG push fit graphics for a smooth edge to edge display
Graphics are printed dye sublimation for deep rich colors
Comes with tool and hard case
Optional backlit LED lighting will give this tower ultimate wow factor